Class OdGeCircArc2d

See

https://docs.opendesign.com/tkernel_api_cpp//OdGeCircArc2d.html Additional documentation.

Hierarchy (view full)

OdGeCurve2d
- OdGeCircArc2d

Index

Constructors

Methods

appendSamplePoints appendSamplePoints1 area boundBlock boundBlock1 center closestPointTo closestPointTo1 closestPointTo2 convertTo3d convertTo3d1 copy distanceTo distanceTo1 endAng endAngFromXAxis endPoint evalPoint evalPoint1 explode getClosestPointTo getClosestPointTo1 getGeomExtents getInterval getInterval1 getLocalClosestPoints getLocalClosestPoints1 getNormalPoint getSamplePoints getSamplePoints1 getSamplePoints2 getTrimmedOffset hasEndPoint hasMidPoint hasStartPoint intersectWith intersectWith1 isClockWise isClosed isDegenerate isEqualTo isInside isKindOf isLinear isOn isOn1 isPeriodic length length1 midPoint mirror orthoBoundBlock orthoBoundBlock1 paramAtLength paramOf paramOf1 radius refVec rotateBy scaleBy set set1 set2 set3 set4 set5 set6 setAngles setCenter setInterval1 setRadius setRefVec setToComplement startAng startAngFromXAxis startPoint tangent tangent1 transformBy translateBy type restoreUvCurve

Constructors

constructor

new OdGeCircArc2d(): OdGeCircArc2d
Returns OdGeCircArc2d
Overrides OdGeCurve2d.constructor
new OdGeCircArc2d(source): OdGeCircArc2d
Parameters
- source: OdGeCircArc2d
Returns OdGeCircArc2d
Overrides OdGeCurve2d.constructor
new OdGeCircArc2d(center, radius): OdGeCircArc2d
Parameters
- center: OdGePoint2d
- radius: number
Returns OdGeCircArc2d
Overrides OdGeCurve2d.constructor
new OdGeCircArc2d(center, radius, startAng, endAng, refVec, isClockWise): OdGeCircArc2d
Parameters
- center: OdGePoint2d
- radius: number
- startAng: number
- endAng: number
- refVec: OdGeVector2d
- isClockWise: boolean
Returns OdGeCircArc2d
Overrides OdGeCurve2d.constructor
new OdGeCircArc2d(startPoint, secondPoint, endPoint): OdGeCircArc2d
Parameters
- startPoint: OdGePoint2d
- secondPoint: OdGePoint2d
- endPoint: OdGePoint2d
Returns OdGeCircArc2d
Overrides OdGeCurve2d.constructor
new OdGeCircArc2d(startPoint, endPoint, bulge, bulgeFlag): OdGeCircArc2d
Parameters
- startPoint: OdGePoint2d
- endPoint: OdGePoint2d
- bulge: number
- bulgeFlag: boolean
Returns OdGeCircArc2d
Overrides OdGeCurve2d.constructor

Methods

appendSamplePoints

appendSamplePoints(fromParam, toParam, approxEps, pointArray, pParamArray): void
Parameters
- fromParam: number
- toParam: number
- approxEps: number
- pointArray: OdGePoint2dArray
- pParamArray: OdGeDoubleArray
Returns void
Inherited from OdGeCurve2d.appendSamplePoints

appendSamplePoints1

appendSamplePoints1(numSample, pointArray): void
Parameters
- numSample: number
- pointArray: OdGePoint2dArray
Returns void
Inherited from OdGeCurve2d.appendSamplePoints1

area

area(startParam, endParam, value, tol): boolean
Parameters
- startParam: number
- endParam: number
- value: number
- tol: OdGeTol
Returns boolean
Inherited from OdGeCurve2d.area

boundBlock

boundBlock(): OdGeBoundBlock2d
Returns OdGeBoundBlock2d
Inherited from OdGeCurve2d.boundBlock

boundBlock1

boundBlock1(range): OdGeBoundBlock2d
Parameters
- range: OdGeInterval
Returns OdGeBoundBlock2d
Inherited from OdGeCurve2d.boundBlock1

center

center(): OdGePoint2d
Returns OdGePoint2d

closestPointTo

closestPointTo(point, tol): OdGePoint2d
Parameters
- point: OdGePoint2d
- tol: OdGeTol
Returns OdGePoint2d
Inherited from OdGeCurve2d.closestPointTo

closestPointTo1

closestPointTo1(point, param, range, tol): OdGePoint2d
Parameters
- point: OdGePoint2d
- param: number
- range: OdGeInterval
- tol: OdGeTol
Returns OdGePoint2d
Inherited from OdGeCurve2d.closestPointTo1

closestPointTo2

closestPointTo2(curve2d, pntOnOtherCrv, tol): OdGePoint2d
Parameters
- curve2d: OdGeCurve2d
- pntOnOtherCrv: OdGePoint2d
- tol: OdGeTol
Returns OdGePoint2d
Inherited from OdGeCurve2d.closestPointTo2

convertTo3d

convertTo3d(): OdGeCurve3d
Returns OdGeCurve3d
Inherited from OdGeCurve2d.convertTo3d

convertTo3d1

convertTo3d1(curve3d): void
Parameters
- curve3d: OdGeCurve3d
Returns void
Inherited from OdGeCurve2d.convertTo3d1

copy

copy(): OdGeCircArc2d
Returns OdGeCircArc2d
Overrides OdGeCurve2d.copy

distanceTo

distanceTo(point, tol): number
Parameters
- point: OdGePoint2d
- tol: OdGeTol
Returns number
Inherited from OdGeCurve2d.distanceTo

distanceTo1

distanceTo1(otherCur, tol): number
Parameters
- otherCur: OdGeCurve2d
- tol: OdGeTol
Returns number
Inherited from OdGeCurve2d.distanceTo1

endAng

endAng(): number
Returns number

endAngFromXAxis

endAngFromXAxis(): number
Returns number

endPoint

endPoint(): OdGePoint2d
Returns OdGePoint2d

evalPoint

evalPoint(param): OdGePoint2d
Parameters
- param: number
Returns OdGePoint2d
Inherited from OdGeCurve2d.evalPoint

evalPoint1

evalPoint1(param, numDeriv, derivatives): OdGePoint2d
Parameters
- param: number
- numDeriv: number
- derivatives: OdGeVector2dArray
Returns OdGePoint2d
Inherited from OdGeCurve2d.evalPoint1

explode

explode(explodedCurves, newExplodedCurve, interval): boolean
Parameters
- explodedCurves: OdGeCurve2dPtrArray
- newExplodedCurve: OdGeIntArray
- interval: OdGeInterval
Returns boolean
Inherited from OdGeCurve2d.explode

getClosestPointTo

getClosestPointTo(point, pntOnCrv, tol): void
Parameters
- point: OdGePoint2d
- pntOnCrv: OdGePointOnCurve2d
- tol: OdGeTol
Returns void
Inherited from OdGeCurve2d.getClosestPointTo

getClosestPointTo1

getClosestPointTo1(curve2d, pntOnThisCrv, pntOnOtherCrv, tol): void
Parameters
- curve2d: OdGeCurve2d
- pntOnThisCrv: OdGePointOnCurve2d
- pntOnOtherCrv: OdGePointOnCurve2d
- tol: OdGeTol
Returns void
Inherited from OdGeCurve2d.getClosestPointTo1

getGeomExtents

getGeomExtents(extents): void
Parameters
- extents: OdGeExtents2d
Returns void
Overrides OdGeCurve2d.getGeomExtents

getInterval

getInterval(interval): void
Parameters
- interval: OdGeInterval
Returns void
Inherited from OdGeCurve2d.getInterval

getInterval1

getInterval1(interval, start, end): void
Parameters
- interval: OdGeInterval
- start: OdGePoint2d
- end: OdGePoint2d
Returns void
Inherited from OdGeCurve2d.getInterval1

getLocalClosestPoints

getLocalClosestPoints(point, approxPnt, nbhd, tol): void
Parameters
- point: OdGePoint2d
- approxPnt: OdGePointOnCurve2d
- nbhd: OdGeInterval
- tol: OdGeTol
Returns void
Inherited from OdGeCurve2d.getLocalClosestPoints

getLocalClosestPoints1

getLocalClosestPoints1(otherCurve, approxPntOnThisCrv, approxPntOnOtherCrv, nbhd1, nbhd2, tol): void
Parameters
- otherCurve: OdGeCurve2d
- approxPntOnThisCrv: OdGePointOnCurve2d
- approxPntOnOtherCrv: OdGePointOnCurve2d
- nbhd1: OdGeInterval
- nbhd2: OdGeInterval
- tol: OdGeTol
Returns void
Inherited from OdGeCurve2d.getLocalClosestPoints1

getNormalPoint

getNormalPoint(point, pntOnCrv, tol): boolean
Parameters
- point: OdGePoint2d
- pntOnCrv: OdGePointOnCurve2d
- tol: OdGeTol
Returns boolean
Inherited from OdGeCurve2d.getNormalPoint

getSamplePoints

getSamplePoints(fromParam, toParam, approxEps, pointArray, paramArray): void
Parameters
- fromParam: number
- toParam: number
- approxEps: number
- pointArray: OdGePoint2dArray
- paramArray: OdGeDoubleArray
Returns void
Inherited from OdGeCurve2d.getSamplePoints

getSamplePoints1

getSamplePoints1(numSample, pointArray): void
Parameters
- numSample: number
- pointArray: OdGePoint2dArray
Returns void
Inherited from OdGeCurve2d.getSamplePoints1

getSamplePoints2

getSamplePoints2(fromParam, toParam, approxEps, pointArray, pParamArray): void
Parameters
- fromParam: number
- toParam: number
- approxEps: number
- pointArray: OdGePoint2dArray
- pParamArray: OdGeDoubleArray
Returns void
Inherited from OdGeCurve2d.getSamplePoints2

getTrimmedOffset

getTrimmedOffset(distance, offsetCurveList, extensionType, tol): OdResult
Parameters
- distance: number
- offsetCurveList: OdGeCurve2dPtrArray
- extensionType: OffsetCrvExtType
- tol: OdGeTol
Returns OdResult
Inherited from OdGeCurve2d.getTrimmedOffset

hasEndPoint

hasEndPoint(endPoint): boolean
Parameters
- endPoint: OdGePoint2d
Returns boolean
Inherited from OdGeCurve2d.hasEndPoint

hasMidPoint

hasMidPoint(point, coef): boolean
Parameters
- point: OdGePoint2d
- coef: number
Returns boolean
Inherited from OdGeCurve2d.hasMidPoint

hasStartPoint

hasStartPoint(startPoint): boolean
Parameters
- startPoint: OdGePoint2d
Returns boolean
Inherited from OdGeCurve2d.hasStartPoint

intersectWith

intersectWith(line, numInt, p1, p2, tol): boolean
Parameters
- line: OdGeLinearEnt2d
- numInt: number
- p1: OdGePoint2d
- p2: OdGePoint2d
- tol: OdGeTol
Returns boolean

intersectWith1

intersectWith1(circarc, numInt, p1, p2, tol): boolean
Parameters
- circarc: OdGeCircArc2d
- numInt: number
- p1: OdGePoint2d
- p2: OdGePoint2d
- tol: OdGeTol
Returns boolean

isClockWise

isClockWise(): boolean
Returns boolean

isClosed

isClosed(tol): boolean
Parameters
- tol: OdGeTol
Returns boolean
Inherited from OdGeCurve2d.isClosed

isDegenerate

isDegenerate(degenerateType, tol): boolean
Parameters
- degenerateType: EntityId
- tol: OdGeTol
Returns boolean
Inherited from OdGeCurve2d.isDegenerate

isEqualTo

isEqualTo(other, tol): boolean
Parameters
- other: OdGeEntity2d
- tol: OdGeTol
Returns boolean
Inherited from OdGeCurve2d.isEqualTo

isInside

isInside(point, tol): boolean
Parameters
- point: OdGePoint2d
- tol: OdGeTol
Returns boolean

isKindOf

isKindOf(entType): boolean
Parameters
- entType: EntityId
Returns boolean
Inherited from OdGeCurve2d.isKindOf

isLinear

isLinear(line, tol): boolean
Parameters
- line: OdGeLine2d
- tol: OdGeTol
Returns boolean
Inherited from OdGeCurve2d.isLinear

isOn

isOn(point, param, tol): boolean
Parameters
- point: OdGePoint2d
- param: number
- tol: OdGeTol
Returns boolean
Inherited from OdGeCurve2d.isOn

isOn1

isOn1(param, tol): boolean
Parameters
- param: number
- tol: OdGeTol
Returns boolean
Inherited from OdGeCurve2d.isOn1

isPeriodic

isPeriodic(period): boolean
Parameters
- period: number
Returns boolean
Inherited from OdGeCurve2d.isPeriodic

length

length(fromParam, toParam, tol): number
Parameters
- fromParam: number
- toParam: number
- tol: number
Returns number
Inherited from OdGeCurve2d.length

length1

length1(tol): number
Parameters
- tol: number
Returns number
Inherited from OdGeCurve2d.length1

midPoint

midPoint(coef): OdGePoint2d
Parameters
- coef: number
Returns OdGePoint2d
Inherited from OdGeCurve2d.midPoint

mirror

mirror(line): OdGeCircArc2d
Parameters
- line: OdGeLine2d
Returns OdGeCircArc2d

orthoBoundBlock

orthoBoundBlock(): OdGeBoundBlock2d
Returns OdGeBoundBlock2d
Inherited from OdGeCurve2d.orthoBoundBlock

orthoBoundBlock1

orthoBoundBlock1(range): OdGeBoundBlock2d
Parameters
- range: OdGeInterval
Returns OdGeBoundBlock2d
Inherited from OdGeCurve2d.orthoBoundBlock1

paramAtLength

paramAtLength(datumParam, length, posParamDir, tol): number
Parameters
- datumParam: number
- length: number
- posParamDir: boolean
- tol: number
Returns number
Inherited from OdGeCurve2d.paramAtLength

paramOf

paramOf(point, tol): number
Parameters
- point: OdGePoint2d
- tol: OdGeTol
Returns number
Inherited from OdGeCurve2d.paramOf

paramOf1

paramOf1(point, range, tol): number
Parameters
- point: OdGePoint2d
- range: OdGeInterval
- tol: OdGeTol
Returns number
Inherited from OdGeCurve2d.paramOf1

radius

radius(): number
Returns number

refVec

refVec(): OdGeVector2d
Returns OdGeVector2d

rotateBy

rotateBy(angle, basePoint): OdGeCircArc2d
Parameters
- angle: number
- basePoint: OdGePoint2d
Returns OdGeCircArc2d

scaleBy

scaleBy(scaleFactor, basePoint): OdGeCircArc2d
Parameters
- scaleFactor: number
- basePoint: OdGePoint2d
Returns OdGeCircArc2d

set

set(center, radius): OdGeCircArc2d
Parameters
- center: OdGePoint2d
- radius: number
Returns OdGeCircArc2d

set1

set1(center, radius, startAng, endAng, refVec, isClockWise): OdGeCircArc2d
Parameters
- center: OdGePoint2d
- radius: number
- startAng: number
- endAng: number
- refVec: OdGeVector2d
- isClockWise: boolean
Returns OdGeCircArc2d

set2

set2(startPoint, secondPoint, endPoint): OdGeCircArc2d
Parameters
- startPoint: OdGePoint2d
- secondPoint: OdGePoint2d
- endPoint: OdGePoint2d
Returns OdGeCircArc2d

set3

set3(startPoint, secondPoint, endPoint, status): OdGeCircArc2d
Parameters
- startPoint: OdGePoint2d
- secondPoint: OdGePoint2d
- endPoint: OdGePoint2d
- status: OdGeError
Returns OdGeCircArc2d

set4

set4(startPoint, endPoint, bulge, bulgeFlag): OdGeCircArc2d
Parameters
- startPoint: OdGePoint2d
- endPoint: OdGePoint2d
- bulge: number
- bulgeFlag: boolean
Returns OdGeCircArc2d

set5

set5(curve1, curve2, radius, param1, param2, success): OdGeCircArc2d
Parameters
- curve1: OdGeCurve2d
- curve2: OdGeCurve2d
- radius: number
- param1: number
- param2: number
- success: boolean
Returns OdGeCircArc2d

set6

set6(curve1, curve2, curve3, param1, param2, param3, success): OdGeCircArc2d
Parameters
- curve1: OdGeCurve2d
- curve2: OdGeCurve2d
- curve3: OdGeCurve2d
- param1: number
- param2: number
- param3: number
- success: boolean
Returns OdGeCircArc2d

setAngles

setAngles(startAng, endAng): OdGeCircArc2d
Parameters
- startAng: number
- endAng: number
Returns OdGeCircArc2d

setCenter

setCenter(center): OdGeCircArc2d
Parameters
- center: OdGePoint2d
Returns OdGeCircArc2d

setInterval1

setInterval1(interval): boolean
Parameters
- interval: OdGeInterval
Returns boolean
Inherited from OdGeCurve2d.setInterval1

setRadius

setRadius(radius): OdGeCircArc2d
Parameters
- radius: number
Returns OdGeCircArc2d

setRefVec

setRefVec(vect): OdGeCircArc2d
Parameters
- vect: OdGeVector2d
Returns OdGeCircArc2d

setToComplement

setToComplement(): OdGeCircArc2d
Returns OdGeCircArc2d

startAng

startAng(): number
Returns number

startAngFromXAxis

startAngFromXAxis(): number
Returns number

startPoint

startPoint(): OdGePoint2d
Returns OdGePoint2d

tangent

tangent(point, line, tol): boolean
Parameters
- point: OdGePoint2d
- line: OdGeLine2d
- tol: OdGeTol
Returns boolean

tangent1

tangent1(point, line, tol, status): boolean
Parameters
- point: OdGePoint2d
- line: OdGeLine2d
- tol: OdGeTol
- status: OdGeError
Returns boolean

transformBy

transformBy(xfm): OdGeCircArc2d
Parameters
- xfm: OdGeMatrix2d
Returns OdGeCircArc2d

translateBy

translateBy(translateVec): OdGeCircArc2d
Parameters
- translateVec: OdGeVector2d
Returns OdGeCircArc2d

type

type(): EntityId
Returns EntityId
Inherited from OdGeCurve2d.type

`Static`restoreUvCurve

restoreUvCurve(curve, surface, tol): OdGeCurve2d
Parameters
- curve: OdGeCurve3d
- surface: OdGeSurface
- tol: OdGeTol
Returns OdGeCurve2d
Inherited from OdGeCurve2d.restoreUvCurve